Машка

Saturday, June 6, 2009

The Pipe Is Back

Welded Back

Even better than before - now it's got three hangers, as it is supposed to. Oh, and it's no longer sideways - damn, I thought that it was supposed to be that way, and it actually looked kinda cool :)

Disaster

The whole thing looks horrible, though. Good time to start budgeting for new exhaust system.

Monday, June 1, 2009

Dude, Where's My Pipe?

Hanger bye-bye

If not for Joe The Neighbour who took a moment to look up from figuring out why his Ferrari is consuming so much oil and angrily spitting it outside through exhaust pipes (impressive sight indeed), we would've ended up with a very, very expensive repair - all the exhaust system at least, and quite possibly the catalyst as well, would've most probably ended up being torn away and eager to meet the lucky road traffic participant following this car, for there was one hanger remaining - the right one. The other (left) hanger was long gone by the time the exhaust pipe was inspected for the first time.

Good Enough

Alas, big disaster was diverted, and for now the temporary fix is in place (about $10 in parts and couple of hours of procuring right parts). Permanent fix is coming Fridaydone.

Tuesday, May 26, 2009

Front Brakes: Good News, Bad News

Following up on brake bleeding session...

Good news is that there's more than enough brake pads, and apparently rotors left. Bad news is that the wear sensor (part #34351179819) is broken (best guess is that whoever changed the pads broke the new sensor and decided to cover it up) and needs to be replaced. Pity - it's a $5 part, and labor involved in checking it and installing a new one is much more than that.

Other bad news is that the ABS sensor cable (part #34521154044) seems to be going (aging insulation is falling apart) and will have to be replaced soon.

Still need to take a look at the rear brakes - don't remember seeing the wear sensor there, either.

Thursday, May 21, 2009

RMeuropean delivery: wow, I'm impressed

Ordered two Pitman arms (part #33321126476) from rmeuropean.com at 13:30 local time yesterday. At 11:30 local time today the package was at the door.

That's the shortest shipment time ever. Wow.

Oh Noes! The Clutch Is Gone... And Back

...now have to figure out what's the cause, and how it is related to yesterday's brake bleeding session.

Master cylinder is the main suspect until the morning sun comes.

UPDATE: Just air in the system, nothing more. Bled the hell out of it while identifying the issue - it's not immediately obvious where the intake hose is, and it's easy to suck the air into the clutch system unless you're watching the fluid level in the main reservoir. For the reference, a safe volume from the maximum level to the level you have to stop at is about 8 fl oz, or 200ml.

Before you set out to bleed the clutch, you may want to check if you need to replace the bleeder screw (part #21521116360), and whether the dust cap (part #21521102908) is in place - will save you some grief.

It is possible to use a vacuum bleeder to bleed the clutch, even though this is not a recommended way - you will most probably have to unscrew the bleeder screw completely (there will not be a massive leak), wrap it into teflon tape and screw it back (thanks to mooseheadm5 for the advice) - otherwise you'll be sucking air through the bleeder screw thread.

While you're there, you might just as well take off the slave cylinder and push the air out of it. Don't have the pedal all the way up when you're installing the slave cylinder back, you won't be able to overcome the resistance of the clutch release spring and put the nuts back.

Tuesday, May 19, 2009

Wonderful Discoveries of Brake Bleeding

When you bleed the brakes for the first time on the car you've just bought, don't be surprised if the brake pad wear sensor cable is neatly tucked under the bleeder valve cap tie. All of it. Including the sensor. Apparently, no participation in the actual process of measuring the brake pad wear was deemed necessary by the last person that changed the brake pads on the car.

Makes me desperately want to check the brake pads and rotors' thickness, despite seller's passionate assurances that they've been *just* replaced.

Tuesday, April 28, 2009

All You Have To Do Is Ask Nicely

Shopping for the next batch of parts for the Bucket List, found a bizarre fact - one seller (names withheld to protect the guilty) had outrageously high shipping price for quite an ordinary bulk item, even though the unit price for the item was about as half as it was in other places. Given that shipping price, it didn't make any sense whatsoever to buy from them, even though every single item in the batch also was priced below the competition.

Well, I thought, it doesn't get any worse, I thought, and called them. Explained the situation, and guess what? They corrected the shipping price, turned out to be a misunderstanding.

All in all, I am probably going to order from a different retailer (those guys do have very high shipping prices on all items and that totally offset savings on unit price), but the rule of the thumb still stays true:

Sometimes, all you have to do is ask nicely.